Advantech AIMB-C300 Manual do Utilizador descarregar pdf (Página 12)

AIMB-C300 User Manual 6

Chapter 2 System Setup

WARNING: Before starting the installation process, turn off the power

switch and disconnect the system power cord from the chassis, or unplug

the power cord from the power outlet. When in doubt, consult with an

experienced technician.

2.1 Removing the top cover

First, remove the chassis cover by two M3 screws, which are on the rear

location of chassis.

To remove the top cover:

1. Detach the two screws on the rear side.

2. Lift off the cover.

IMPORTANT: Make sure you fully remove the top cover when main-

taining full-size cards.

Check all the power supply cables and make certain that they are not tan-

gled or blocking the cooling fan blades. This prevents any accidental

damage to the cables.(please refer Figure2-1)

PS: We assume the board has already been placed inside.

2.2 Chassis Front and Rear Sections

The AIMB-C300 comes in two sections: the front section and rear sec-

tion.

The front section includes:

Figure 2.1: Remove the top cover

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Sem comentários

Advantech AIMB-C300 Manual do Utilizador Página 12