
11 Chapter 2
2.5 Replacing the Fan
1. Unscrew the two screws on the fan bracket, and slide the bracket back-
wards. See Figure 2-4 below:
2. Replace the new fan and fix it to the bracket.
3. Put back the fan bracket and fasten the screws.
Figure 2-4: Replacing the fan
2.6 Replacing the Filter
The filter is located next to the lockable door. If IPC-602 is under use
constantly, the filter should be changed about once a month. To replace
the filter, refer to Figure 2-5 below and do the following:
1. Open the lockable door.
2.
Remove the filter by gently pulling the tab and sliding the filter rightwards.
3. Slide a new filter in until it snaps into place.
4. Close and lock the lockable door.
Comentários a estes Manuais