Advantech PCA-6190 Manual do Utilizador descarregar pdf (Página 17)

9 ACP-4320 User Manual

Chapter 2 System Setup

other edge of the card has been inserted into the plastic guiding fillister. Fasten

the screws on the top of both brackets of the card. (see Figure 2.4).

3. Repeat Step 1 and 2 if there is more than one add-on card to be installed.

4. Connect the wires for the POWER switch, RESET switch, and the Connect the

9-pin USB wire, Power switch wire, and the System Reset switch wire from the

chassis to the CPU card. Connect the wire of LAN LED from the chassis to the

CPU card. Connect the wire of HDD LED from the SATA HDD backplane to the

CPU card.

5. For the PICMG 1.0 BACKPLANE, connect the orange-white wire from the con-

nector "CN20" on the CPU card to connector "HCN1" on the backplane. Con-

nect the power switch wire from the chassis to connector "CN21" on the CPU

card.

Figure 2.4 Installing a CPU card

Note! Most of Advantech's full-sized CPU cards support the front USB func-

tion. However, only the PCA-6184-B, PCA-6186-B, PCA-6188, PCA-

6190 and the later full-sized CPU cards support the front LAN LED func-

tion.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 41 42

Sem comentários

Advantech PCA-6190 Manual do Utilizador Página 17