Advantech Mini-ITX AIMB-250 Series Manual do Utilizador descarregar pdf (Página 50)

AIMB-253 User Manual 40

EIDE Primary Master/Slave PIO

The EIDE PIO (Programmed Input/Output) fields let you set a PIO mode

for the EIDE devices that the onboard EIDE interface supports. Modes 0

through 4 provide successively increased performance. In [Auto] mode,

the system automati- cally determines the best mode for each device.

EIDE Primary Master/Slave UDMA

Ultra DMA 33/66/100/133 implementation is possible only if your EIDE

hard drive supports it and the operating environment includes a DMA

driver (Windows ME, XP or a third-party EIDE bus master driver). If

your hard drive and your system software both support Ultra DMA/33,

Ultra DMA/66, Ultra DMA/100 and Ultra DMA/133, select [Auto] to

enable BIOS support.

*** On-Chip Serial ATA Setting ***

On-Chip Serial ATA

This setting specifies the function of the on-chip SATA controller.

PATA EIDE Mode / SATA Port

These settings specify the modes of the PATA & SATA ports.

[Disabled] Disable SATA controller

[Auto] Automatically determined by BIOS

[Enhanced Mode] Enable both SATA and PATA, max. 6 EIDE drives

supported

[SATA Only] SATA operates in legacy mode

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 61 62

Sem comentários

Advantech Mini-ITX AIMB-250 Series Manual do Utilizador Página 50