Advantech PCM-3353 Manual do Utilizador descarregar pdf (Página 19)

11 PCM-3353 User Manual

Chapter 2 Installation

2.13.3 LVDS TFT LCD Connector (CN42)

Four PCM-3353 series, the board supports 1 channel 18-bit LVDS LCD panel dis-

plays.

2.14 Ethernet Configuration

The board is equipped with one high performance 32-bit PCI-bus Ethernet interface

which are fully compliant with IEEE 802.3U 10/100Mbps standards. They are sup-

ported by all major network operating systems.

2.14.1 100Base-T Connector (CN26)

100Base-T connections are made via one internal 10-pin box header.

2.15 Watchdog Timer Configuration

An onboard watchdog timer reduces the chance of disruptions which EMP (electro-

magnetic pulse) interference can cause. This is an invaluable protective device for

standalone or unmanned applications. Setup involves one jumper and running the

control software (refer to Appendix A).

2.16 USB Connectors (CN15,CN17)

The board provides up to four USB (Universal Serial Bus) ports using Plug and Play.

The USB interfaces comply with High Speed USB specification Rev. 2.0 which sup-

ports 480 Mbps transfer rate, and are fuse protected.

The USB interface is accessed through two 5 x 2-pin flat-cable connectors. You will

need an adapter cable if you use a standard USB connector. The adapter cable has a

5 x 2-pin connector on one end and a USB connector on the other.

The USB interfaces can be disabled in the system BIOS setup.

2.17 GPIO (General Purpose Input Output) (CN36/

CN37)

The board supports 8-bit GPIO through GPIO connector. The 8 digital inputs and out-

puts can be programmed to read or control devices, with each input or output

defined. The default setting is 8 bits input.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 69 70

Sem comentários

Advantech PCM-3353 Manual do Utilizador Página 19