Advantech SPC-57 Manual do Utilizador descarregar pdf (Página 19)

2.1 Quick Starting

Step1: Unpack the SPC-57 from its packing. Please check the packing list at the

beginning of this manual.

Step2: Connect the power connector to 10 ~ 28 Vdc power source. The power source

can either be from a power adapter or an in-house power source.

Step3: Connect the power source to the system power supply.

Step4: Plug in the power lines and turn on the system power switch, you will see the

Welcome screen of Windows

CE.NET. Then you can start to use SPC-57.

Step5: Turn on the power switch.

Step6: Calibrate the touchscreen.

2.2 Supplying Power to SPC

2.1.1 Supplying Power to SPC-57C

1. SPC accepts only DC power, not AC power

2. The DC input range for SPC is 10V ~ 28V.

3. Install the Vcc cable and GND cable into the male power connector (male power

connector is in the package of SPC)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 84 85

Sem comentários

Advantech SPC-57 Manual do Utilizador Página 19