Advantech RSB-4410 Manual do Utilizador descarregar pdf (Página 51)

43 RSB-4410 User Manual

Chapter 3 Software Functionality

2) The sum of pixel clock rates is up to 240 MHz

3.8.5 Network Setup

Default: IP get form DHCP.

Manual: Set IP by below command:

#ifconfig eth0 192.168.0.1 up

ifconfig is to configure network interfaces, the manual page is as below.

SYNOPSIS

ifconfig [-v] [-a] [-s] [interface]

ifconfig [-v] interface [aftype] options | address ...

OPTIONS

-a display all interfaces which are currently

available, even if

down

-s display a short list (like netstat -i)

-v be more verbose for some error conditions

interface

The name of the interface. This is usually a

driver name followed by a unit number, for

example eth0 for the first Ethernet interface. If

your kernel supports alias interfaces, you can

specify them with eth0:0 for the first alias

of eth0. You can use them to assign a second

address. To delete an alias interface use

ifconfig eth0:0 down. Note: for every scope

(i.e. same net with address/netmask combination)

all aliases are deleted,if you delete the first

(primary).

[aftype]

up This flag causes the interface to be activated.

It is implicitly specified if an address is

assigned to the interface.

down This flag causes the driver for this interface to

be shut down.

address The IP address to be assigned to this interface.

netmask [addr]

Set the IP network mask for this interface. This

value defaults

to the usual class A, B or C network mask (as

derived from the

interface IP address), but it can be set to any

value.

broadcast [addr]

If the address argument is given, set the

protocol broadcast

address for this interface. Otherwise, set

Note! Specified pixel clocks frequencies are applicable for internal clocks, but

may be limited by IO buffers speed capability. Final numbers are sub-

jected to AC characterization.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 65 66

Comentários a estes Manuais

Sem comentários

Advantech RSB-4410 Manual do Utilizador Página 51

Comentários a estes Manuais

Manuais e produtos relacionados com Processadores Advantech RSB-4410