Advantech PCA-6289 Manual do Utilizador

PCA-6289Socket 604 Dual Xeon™/LV Xeon™ Full-sized Processor Card with PCI-X/DDR/VGA/ Dual GbE/400 or 533 MHz FSBUser’s Manual

PCA-6289 User Manual x

1CHAPTER1General Information

PCA-6289 User’s Manual 2Chapter 1 Hardware Configuration1.1 IntroductionThe PCA-6289 Series all-in-one industrial grade single board computer is a h

33. Supports Hyper-Threading : This allows HT-enabled Xeon™ / LV Xeon™ processors to process two threads simultaneously. By building two logical proce

PCA-6289 User’s Manual 4• ISA bus: Support ISA high drive. PCI-to-ISA bridge: ITE IT8888.• AC-97 Audio: AC-97 2.0 output, 10 pin header x 1.• USB

51.4 Jumpers and ConnectorsConnectors on the PCA-6289 single board computer link it to external devices such as hard disk drives and a keyboard. In a

PCA-6289 User’s Manual 6Table 1.2: Connectors on PCA-6289 IO boardLabelFunctionCN1 Primary IDE connectorCN2 Secondary IDE connectorJ1 PIO connectorJ2

71.5 Board Layout: Jumper and Connector LocationsFigure 1.1: Jumper and Connector locations

PCA-6289 User’s Manual 81.6 PCA-6289 Block DiagramFigure 1.2: PCA-6289 Block DiagramPCI to ISABridgeITE IT8888ATi Rage XL32bit/33MHz PCI BusBIOSSupe

91.7 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make conne

PCA-6289User’s Manual iiCopyright NoticeThis document is copyrighted, 2005, by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reser

PCA-6289 User’s Manual 101.8 Jumper SettingsThis section provides instructions on how to configure your single board computer by setting the jumpers.

111.9 System MemoryThe system memory is provided by DIMM’s (Dual In-line Memory Mod-ules) on the CPU board. The CPU board contains two memory banks:

PCA-6289 User’s Manual 12DIMM3 (green sockets). If additional memory is to be used, another matched pair of DIMMs have to be installed in DIMM2 &

13Table 1.5: Installing the heatsinkStep 1Insert the fan in the CPU bed.Step 2As shown in the picture, screw tightStep 3Then get the fan connector con

PCA-6289 User’s Manual 14

15 Chapter 2 CHAPTER 2Award BIOS Setup

PCA-6289 User’s Manual 16Chapter 2 Award BIOS Setup2.1 IntroductionAward’s BIOS ROM has a built-in setup program that allows users to modify the bas

17 Chapter 2 2.4 Advanced BIOS FeaturesThe “Advanced BIOS Features” screen appears when choosing the “Advanced BIOS Features” item from the “Initi

PCA-6289 User’s Manual 182.4.1 Hard Disk Boot PrioritySelect hard disk boot device priority.2.4.2 Virus WarningEnable virus warning, the commands are

19 Chapter 2 2.4.7 Boot Other DeviceTo boot another device, choose "Enabled" or "Disabled".2.4.8 Swap Floppy DriveIf the system

iii1.0.1 A Message to the Customer Advantech customer servicesEach and every Advantech product is buil

PCA-6289 User’s Manual 20.2.4.16 APIC ModeThis setting allows you to enable the APIC mode, the choice is “Dis-abled” or “Enabled.”2.4.17 MPS Version C

21 Chapter 2 2.5.2 Video BIOS CacheableSelecting Enabled allows caching of the video BIOS ROM at C0000h, resulting in better video performance. Howev

PCA-6289 User’s Manual 222.6.1 On-Chip IDE DeviceThe system chipset contains IDE HDD Block mode, and a PCI IDE inter-face with support for two IDE Pri

23 Chapter 2 2.6.9 Onboard Parallel PortThis feature allows you to select the I/O address and IRQ for the onboard parallel port. The default I/O addr

PCA-6289 User’s Manual 242.6.13 Power Supply TypeThe choices: AT, ATX.2.6.14 ACPI FunctionThe ACPI standard (Advanced Configuration and Power Interfac

25 Chapter 2 2.6.20 Soft-Off by PWRBTN (Power Button)Pressing the power button for more than 4 seconds forces the system to enter theSoft-Off state w

PCA-6289 User’s Manual 262.7 PnP/PCI Configurations.2.7.1 Reset Configuration DataNormally, you leave this field Disabled. Select Enabled to reset Ex

27 Chapter 2 2.8 PC Health StatusAfter you have read the PC Health Status, press the <ESC> key to go back to the main program screen.2.9 Load

PCA-6289 User’s Manual 282.11 Set Supervisor/User PasswordThe Supervisor/User Password utility sets the password. The mainboard is shipped with the p

29 Chapter 3 CHAPTER 3VGA Setup

PCA-6289User’s Manual iv1.0.2 Product warrantyAdvantech warrants to you, the original purchaser, that each of its prod-ucts will be free from defects

PCA-6289 User’s Manual 30Chapter 3 VGA Setup3.1 Before you beginThe PCA-6289 series comes with a driver installation CD-ROM that enables you to inst

31 Chapter 3 3.2 Installing VGA DriverFigure 3.1: Installing VGA DriverStep 1Double click the folder of VGA. The menu will display. Select the folde

PCA-6289 User’s Manual 32Step 4To install ATI soft-ware, you must accept this agree-ment. Click YES to continue Setup.Step 5Please select the componen

33 Chapter 4 CHAPTER 4Chipset Software Installation Utility

PCA-6289 User’s Manual 34Chapter 4 Chipset Software Installation Utility4.1 Installing Intel Chipset SoftwareStep 1Open the folder of Intel Chipset

35 Chapter 4 Step 3Click Next to install INF.Step 4Click Yes to con-tinueStep 5Click NEXT

PCA-6289 User’s Manual 36Step 6Select Yes, I want to restart my computer now. Then click Finish. INF is installed.Step 7Click Yes to con-tinue.Step 8C

37 Chapter 4 Step 9Select Yes, I want to restart my computer now. Then click Finish. INF is installed.

PCA-6289 User’s Manual 38

39 Chapter 5 CHAPTER 5LAN Configuration

v1.0.3 Initial InspectionBefore you begin installing your single board computer, please make sure that the fol-lowing materials have been shipped:If a

PCA-6289 User’s Manual 40Chapter 5 LAN Configuration5.1 InstallationStep 1After the folder of LAN driver dis-plays, click it.Step 2Double click the

41 Chapter 5 Step 4Click OK to con-tinueStep 5Click NEXT to continueStep 6Click NEXT after accepting the license agree-ment.

PCA-6289 User’s Manual 42

43 Chapter 6 CHAPTER 6USB 1.1 Configuration

PCA-6289User’s Manual 44Chapter 6 USB 1.1 Configuration6.1 InstallationStep 1Choose the setup type that best suits your needs and then click NEXT.St

45 Appendix A AppendixAProgramming the Watchdog Timer

PCA-6289 User’s Manual 46Appendix A Programming the watchdog A.1 Programming the Watchdog TimerThe PCA-6289's watchdog timer can be used to mon

47 Appendix A A.1.3 Watchdog Timer Programming ProcedurePower On or Reset the SystemThe initial value of WDT Control Register (D3~D0) is zero (0), wh

PCA-6289 User’s Manual 48 Set WDT Control Register to control the WDT working mode. The initial value of WDT Control Register is shown as follows:Foll

49 Appendix A After finishing the above settings, you must output the Control Register’s value to WDT Configuration Port. Then WDT will start accordi

PCA-6289User’s Manual viImportant Safety InformationSAFETY INSTRUCTIONSThis device complies with the requirements in part 15 of the FCC rules: Operat

PCA-6289 User’s Manual 50

51 Appendix B AppendixBI/O Pin Assignments

PCA-6289 User’s Manual 52Appendix B Pin AssignmentsB.1 Mainboard• J1, J2: Power Connector• J4, J5: Single Ramp System FAN Connector• J7: External

53 Appendix B B.2 Daughterboard• J1: 2x13 2.0mm Box Header for PIO Connector• J2: Floppy Disk ConnectorPin Description Pin Description1STB-2 PD03

PCA-6289 User’s Manual 54• J3: SIO2 Connector• J4: SIO1 Connector• J5: ATX Power Connector (Daughterboard)• J6: AC’97 Connector• J7: 1x2 2.54mm P

55 Appendix B • J8, J9: USB Single Upright Right-Angle Connector• J12: Dual USB pin header for front USB interface• J13: 1x3 2.54mm Pin Header for

PCA-6289 User’s Manual 56• JP5: 1x2 2.0mm Pin Header for SMBUS External Connector• JP6: 1x2 2.54mm Pin Header for Reset Button• JP7: 1x2 2.54mm Pin

57 Appendix B • CON2: IDE (Secondary) Connector31 Interrupt 14 32 NC33 Disk Address 1 34 DMA66 Detect35 Disk Address 0 36 Disk Address 237 HDC CS100

PCA-6289 User’s Manual 58

vii Table of ContentsContentsChapter 1 Hardware Configuration ... 21.1 Introduction ...

PCA-6289 User Manual viii2.4.13 Typematic Rate (Chars/Sec) .... 192.4.14 Typematic Delay (msec) ...

ix Table of Contents2.11 Set Supervisor/User Password ........... 282.12 Save & Exit Setup .......