MotherBoard Ready
SM
System • MODEL 526E
USER QUICK START GUIDE
Product Safety Warnings
WARNINGS
Ensure that the computer is disconnected from its power
source and from all telecommunications links, networks, or
modem lines whenever the chassis cover is removed. Do not
operate the computer with the cover removed.
AVERTISSEMENT
Assurez vous que le système soit débranché de son
alimentation ainsi que de toutes les liaisons de
télécomunication, des réseaux,et des lignes de modem avant
d’enlever le capot. Ne pas utiliser le système quand le capot
est enlevé.
WARNUNG
Das System darf weder an eine Stromquelle angeschlossen
sein noch eine Verbindung mit einer
Telekommunikationseinrichtung, einem Netzwerk oder einer
Modem-Leitung haben, wenn die Gehäuseabdeckung
entfernt wird. Nehmen Sie das System nicht ohne die
Abdeckung in Betrieb.
AVVERTENZA
Prima di rimuovere il coperchio del telaio, assicurarsi che il
sistema sia scollegato dall’alimentazione, da tutti i
collegamenti di comunicazione, reti o linee di modem. Non
avviare il sistema senza aver prima messo a posto il
coperchio.
ADVERTENCIAS
Asegúrese de que cada vez que se quite la cubierta del chasis,
el sistema haya sido desconectado de la red de alimentación
y de todos lo enlaces de telecomunicaciones, de red y de
líneas de módem. No ponga en funcionamiento el sistema
mientras la cubierta esté quitada
Connect the Peripheral & Power Cables
Connect the peripherals (Keyboard, Mouse, Video, etc.) required for
correct operation of the computer system. Refer to the enclosed
diagram of the specific Model 526E and motherboard combination for
the location and function of the various peripheral connectors on the
system. If you are unsure what model of motherboard is installed, then
locate the diagram that matches the system. The function of the
connectors is standard for different motherboards.
NOTE
All of the external peripheral cables are designed such that the
connector can only be inserted in one orientation. Check the
orientation of the connector if the cable will not connect easily. Do
not use excessive force to connect a cable.
Check that the power cord supplied is designed and approved for
power connections. If you are unsure of the power cords suitability,
check with the safety approval agency in your region of the world. If
the power cable supplied is not suitable please review the instructions
in the section “Power Cord Replacement”. Before connecting the
power cord to the system, make sure the power supply is set for the
correct voltage operating range for your region. Refer to the enclosed
diagram of the specific Model 526E and motherboard combination for
the location and instructions for setting the computer system’s
operating voltage setting.
Warning
The power supply voltage standby circuit is active when the
computer is turned off. Ensure that the computer is
disconnected from its power source and from all
telecommunications links, networks, or modem lines
whenever the chassis cover is removed. Do not operate the
computer with the cover removed.
Power Cord Replacement
WARNING
Do not attempt to modify or use the supplied AC power cord
if it is not the exact type required.
In some cases, the power cord supplied with this system may not be
compatible with the AC wall outlet in your region. If this is true, you
must obtain a suitable power cord that meets the following criteria:
• The cord must be rated for use at the AC voltage available,
with a current rating that is at least 125% of the current
rating of the product.
• The AC plug end must be terminated in a grounding-type
male plug designed for use in your region. The plug ends
must be labeled or marked to indicate they have been
certified by an agency acceptable in your region.
• The connector at the product end must be an IEC 320, sheet
C13, female connector (or the equivalent EN 60 320
connector).
• The cord must be less than 14.8 feet (4.5 meters) long and,
for use in Europe, be created with <HAR> (harmonized) or
VDE certified cordage.
Turning on the Computer
Your computer is supplied with an advanced power supply that allows
the operating system to control the power supplies operation. The
power switch on the power supply is used to initially enable power to
the system. (See the enclosed Installation Diagram) The front power
switch is then used to turn the system on or to put the system into a
sleep mode. (See Figure 1) The power switch can also be used to turn
off the computer before the operating system is completely loaded.
WARNING
TO PREVENT ACESS TO HIGH ELECTRICAL ENERGY PARTS.
DO NOT REMOVE THE COVERS WHILE THE SYSTEM IS
POWERED ON!
Copyright © 2013, SySTIUM® Technologies, LLC
PN: 90526-09
Comentários a estes Manuais