Advantech ACP-4320 Manual do Utilizador descarregar pdf (Página 25)

2.4 Installing Add-on Card

To install a plug-in card, please proceed as follows:

1. Select a vacant slot to install the add-on card. Then remove the corre-

sponding I/O bracket attached to the rear plate of the chassis.

2. Insert a plug-in card. Make sure that the card bracket has been inserted

properly and the other edge of the card has been fixed in the guiding

rail. Fasten the card at the top of the bracket with a screw.

3. Repeat Step 2 if there is more than one card.

4. Insert the clamp pad(s) into the hold-down clamp. The clamp pads

cushion the plug-in cards from shock and vibration. The hold-down

clamp has two rows of notches for the pads to be inserted, one row is

for PCI cards, the other row for ISA cards. Depending on the card

height, the buffers can be inserted as the narrow end face upwards or

downwards.

5. After inserting the clamp pads, return the hold-down clamp and fasten

it with screws.

Note: Most of Advantech's full-sized CPU cards sup-

port the front USB function. However, only the

PCA-6184-B, PCA-6186-B, PCA-6188, PCA-

6190 and the later full-sized CPU cards support

the front LAN LED function.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Sem comentários

Advantech ACP-4320 Manual do Utilizador Página 25