Advantech ACP-4320 Manual do Utilizador descarregar pdf (Página 27)

Figure 2.5: Installing the drives

2.5.1 Installing a 5.25" disk drive

1. Remove the two screws, which mount the FDD bracket to the drive

bay unit.

2. Remove the four screws, which mount the drive bay to the chassis,

then take out the drive bay.

3. Remove the cover of one 5.25" drive bay. Insert one 5.25" disk drive

(e.g., 5.25" CD-ROM/-RW) into the proper location in the drive bay

and fix it with four screws.

4. Connect a 40-pin flat cable from the CPU card/motherboard to the

optical disk drive.

5. Plug in a peripheral power connector from the power supply to the

optical disk drive.

6. Repeat Steps 3 ~ 5 if there is more than one drive.

7. Return the drive bay unit into the chassis and fix it with the four

screws.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Sem comentários

Advantech ACP-4320 Manual do Utilizador Página 27