Advantech RS-485 Manual do Utilizador descarregar pdf (Página 157)

100

101

ADAM-5000 6-35

Chapter 6

$aaSi1 $aaSi1

Name RTD Zero Calibration

Description Calibrates a specified RTD input module of a specified

system to correct for offset errors.

Syntax $aaSi1(cr)

$ is a delimiter character.

aa (range 00-FF) represents the 2-character hexadecimal

address of the ADAM-5000 system which contains the

module which is to be calibrated.

Si identifies the slot i (i:0 to 3) containing the RTD

module to be calibrated.

1 represents the zero calibration command.

(cr) is the terminating character, carriage return (0Dh).

Response. !aa(cr) if the command is valid.

?aa(cr) if an invalid operation was entered.

There is no response if the module detects a syntax error

or communication error or if the specified address does

not exist.

! delimiter character indicating a valid command was

received.

? delimiter character indicating the command was

invalid.

aa (range 00-FF) represents the 2-character hexadecimal

address of an ADAM-5000 system.

(cr) is the terminating character, carriage return (0Dh).

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 347 348

Comentários a estes Manuais

Sem comentários

Advantech RS-485 Manual do Utilizador Página 157

Comentários a estes Manuais

Manuais e produtos relacionados com Módulos I/O analógicos e digitais Advantech RS-485