Advantech Data Acquisition Modules ADAM 4000 Manual do Utilizador descarregar pdf (Página 264)

100

101

Chapter 7

ADAM 4000 Series User’s Manual

%AANNTTCCFF

Name Configuration command

Description Sets the address, input mode, baud rate, checksum status

and frequency gate time for a specified counter/frequency

module

Syntax %AANNTTCCFF (cr)

% is a delimiter character.

AA (range 00-FF) represents the 2-character hexadecimal

address that you will access to.

NN represents the new hexadecimal address of the

counter/frequency module. Range is from 00h to FFh.

TT represents the input mode.

50h : counter input mode

51h : frequency measurement mode

CC represents the baud rate code.

(Refer to Table 7-3 on next page).

Hexadecimal value FF which is converted to an 8-bit

parameter represents the checksum status and frequency

gate time. The layout of the 8-bit parameter is shown in

Figure 7-3 below.

Bits 0, 1, 3, 4, 5 and 7 are not used and are set to 0.

(cr) is the terminating character, carriage return (0Dh).

Figure 7-3 Data format for FF (8-bit parameter)

4080, 4080D

1 2 ... 259 260 261 262 263 264 265 266 267 268 269 ... 428 429

Comentários a estes Manuais

Sem comentários

Advantech Data Acquisition Modules ADAM 4000 Manual do Utilizador Página 264

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Advantech Data Acquisition Modules ADAM 4000